Þ  The Company
 
Þ  Current Offers
 
Þ  Special Offers
 
Þ  Search
 
Þ  How to find us
 
Þ  Imprint/Contact


Josef Krückels
Textilmaschinen GmbH
Volksbadstr. 85
D- 41065 Mönchengladbach

Tel.: +49 (0)21 61 - 49 26 80
Fax : +49 (0)21 61 - 48 5 44


Krückels Auktionshalle

Special Offers

Categorie:  • Spinning | Preparation | Guillotines
Special Offer   
Guillotine Fiber Cutter
Pos-Nr.: 92295     Pieces: 1

PIERRET, P28 R1, 1989,staple length 6,3 to 58,5mm, suitable for glas fibers, too
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Spinning | Twisting | Doubling machines
Special Offer   

show details
Inspectio and Fokding Machine
Pos-Nr.: 7000     Pieces: 1

GOETZ, working width 2.100 mm, Y.O.M. 19875, for 0-16 m/min., electronically controlled doubling, meter counter
The machine is also suitable for elastic fabrics
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Dyeing | Cloth | Beam dyeing
Special Offer   
Beam Dying Machine
Pos-Nr.: 92306     Pieces: 1

THEN/JASPER, type 1050, bis 3000mm ww, yoc 1965, 1996 complete reconditioned by JASPER, 3150 ltr, 3 atm, 140C°, BERCO SEDO controle Sedomat 2000, mixer, level controle, 6 dye beams, 2 feeding carriers
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Dyeing | Cloth | Jigger
Special Offer   
Jumbo Jigger
Pos-Nr.: 92239     Pieces: 1

THIES, yoc 2007, 2400mm ww, 1000mm die, control 858 (Sicom 777TC), min 300ltr/max 1200ltr, rarely used (30.000h)
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Weaving | Preparation | Warpers
Special Offer   
Sample Warper
Pos-Nr.: 92284     Pieces: 1

KARL MAYER, Gir-O-Matic GOM 16-S,yoc 2011, 2200mm ww, drum circumference 700cm, sample length 14 to 490m, creel with 16 ends, warp speed 1.000 m/min, beaming speed 20m/min
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Wet | Bleaching
Special Offer   
Cold Pad Batch Bleaching machine
Pos-Nr.: 92253     Pieces: 1

BENNINGER, 2200mm ww, yoc about 1985, inlet with BIANCO straightener, 2 x 2 washing boxes "Extracta" with squeezer for impregnation bleaching, small Washing box, batcher, 7 closed dwelling chambers
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Wet | Foulards
Special Offer   

show details
Padder
Pos-Nr.: 6961     Pieces: 1

KÜSTERS, type 222.49-2400, Masch Nr 10157858-02, working width 2.400 mm, Y.O.M. 1978, in 2008 completely overhauled, with S-roller, stainless steal trough
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Wet | Centrifuges/Hydro Extractors
Special Offer   

show details
Hydro Extractor
Pos-Nr.: 92175     Pieces: 1

KRANTZ, 300kg, 1969, 1500mm dia, 730upm, Mach no 2602157
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Wet | Mercerizing
Special Offer   

show details
Mercerising Machine
Pos-Nr.: 92148     Pieces:

MENZEL, Minimerc, 2400mm working width, yoc 1999, but in 2015 general recoditioned and equipped with new control panel and motors, with new base messuring and dosing IST-HAASNER
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Wet | Mercerizing
Special Offer   
Mecerizing Machine
Pos-Nr.: 92245     Pieces: 1

BENNINGER, type Ben-Dimensa, yoc 2008, 2200mm ww
fabric infeed with E+L KF20
washing compartement EXTRACTA
2 mercerising compartements with squeezer
neutralization with squeezer
2 washing compartements EXTRACTA with Squeezer
batcher
Machine was complete reconditioned in 2014
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Dry | Brushing machines
Special Offer   




show details
Fabric Cleaning Machine
Pos-Nr.: 6885     Pieces: 1

HOLTHAUSEN, Y.O.M. 2001, 185cm roller width, with 4 brushes, 1 for each side of the fabric, exhaust
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Dry | Calenders
Special Offer   

show details
Calibrating Calendar
Pos-Nr.: 6964     Pieces: 1

2 Steal rollers, 2200 roller width
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Dry | Calenders
Special Offer   

show details
Calibrating Calendar
Pos-Nr.: 6963     Pieces: 1

SUCHY, No 131/08, yoc 11/2008, roller width 3700mm, 2 cooling rollers, incl.2 cooling devices ERS, type SC 5.2V, range of teprature +10...+32°C, cooling capacity each 6000W, Embossing, smoothing and compressing different materials with high, uniform contact pressure and precise temperature stability
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Dry | Cutting machines
Special Offer   

show details
Longitudinal Cutting Machine
Pos-Nr.: 6965     Pieces: 1

GÖTZE, 4 knives, 2008, roller width 3550mm
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Dry | Cutting machines
Special Offer   

show details
Longitudinal Cutting Devicee
Pos-Nr.: 6966     Pieces: 1

6 knives, roller width 2700mm
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Dry | Cutting machines
Special Offer   
Hot Cutting Machine
Pos-Nr.: 92298     Pieces: 1

CALEMARD, type VEGA T, 2500mm ww, yoc 2008
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Dry | Cutting machines
Special Offer   
Roll Cutter
Pos-Nr.: 92261     Pieces: 2

WASTEMA, STV 1700/R, 125mm working width, max roll dia 270mm, knife dia 370mm, manuell knife motion, yoc 1988
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Dry | Cutting machines
Special Offer   

show details
Sample Cutting Machine
Pos-Nr.: 92176     Pieces: 1

IMPERIA, Hans Schilling, yoc 1968, 50cm width
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Dry | Cylinder dryers
Special Offer   
Cilynder Dryer
Pos-Nr.: 92250     Pieces: 1

TATTERSAL, 2000mm roller width, 12 cylinders
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Dry | Cylinder dryers
Special Offer   



show details
Cylinder Dryer
Pos-Nr.: 92071     Pieces: 1

WUMAG, 22 Cylinders, 2700mm roller width, yoc 1987 to 2003, upto 200C, 8 cylinders 600mm dia, 13 Cylinders 800mm dia, 1 Cylinder 1500mm dia, 6 to 10 bar pressure
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Dry | Dryers
Special Offer   
Pre Dryer
Pos-Nr.: 92292     Pieces: 1

BRÜCKNER, 3200mm wide, yoc 2002, one chamber two passages, contense 6,5m, padder KÜSTERS type 133, 3 rollers(1965,overhauled in 1999), BASTIAN winding BTW 16-1/CE
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Dry | Dryers
Special Offer   


show details
Sieve Drum Dryer
Pos-Nr.: 91755     Pieces: 1

FLEISSNER, working width 3.500 mm, with 6 drums, 1.400 mm dia., Y.O.M. ca. 1985, in 2008 completely overhauled and equipped witih new motors and burners. Up to 250°C. With natural gas burners 1000/400 kW
SIEMENS control S7 from 2008 with touchscreen
Motors with frequency converter, 50 m per minute, up to 250°C
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Dry | Dryers
Special Offer   

show details
Infrared Preheater
Pos-Nr.: 92215     Pieces: 1

MUZZI, yoc 2004, 2200mm, gas heated
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Dry | Emerizing machines
Special Offer   

show details
Emmerizing and Raising Machine
Pos-Nr.: 92232     Pieces: 1

XETMA/VOLLENWEIDER, type Multisystem XREB, yoc 2011, ww 2000mm, the tambour consists of 12 Three Star Systems which are assembled with different rolls for emmerizing and raising. So one can change between the finishing processes within a few minutes. incl. Filter
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Dry | Gas singeing machines
Special Offer   
Gas Singing Machine
Pos-Nr.: 92246     Pieces: 1

OSTHOFF, type PK90, yoc 1992, 2400mm roller width:
fabric infeed with E+L KF10
brushing, type VP87/1
singing with two burners
brushing KLEINEWEFERS/RAMISCH, type VI6, 2 brushes
desizing, type FO-02/2, yoc 2006, Squeezer
batcher
Filter
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Dry | Inspection machines
Special Offer   
Inspection Tables
Pos-Nr.: 6975     Pieces: 2

EDELMANN, 2000mm roller width, yoc about 1990, batch to batch with return run
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Dry | Inspection machines
Special Offer   

show details
inspection Table
Pos-Nr.: 92190     Pieces: 1

SUCHY, roller width 2400mm, working width 2200mm, yoc 2012, from batch to batch, speed 0-60m/min, running forward and back, meter counter, can be also used for coated fabrics, 100-200µm
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Dry | Inspection machines
Special Offer   

show details
Inspection Table
Pos-Nr.: 92075     Pieces: 1

MONFORTS, MBK, 1974, 1800mm working width, ascending batcher, Light from bottom and top, meter counter
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Dry | Inspection machines
Special Offer   

show details
Inspection Table
Pos-Nr.: 92076     Pieces: 1

UNGLAUB, UW16, 1989, 1800mm working width, ascending batcher with selvage controle, Light from the top, meter Counter, for elestic cloth group K I and K II
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Dry | Pressing
Special Offer   
Punching Die
Pos-Nr.: 7003     Pieces: 1

SANDT, type HSP 520/10, cutting table 650 x 16000mm, travelling head 650 x 650mm, maximum 25to pressure, yoc about 2000
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Dry | Rope washing machines
Special Offer   

show details
Rope Opener
Pos-Nr.: 92126     Pieces: 1

CORRINO/KRISTAL, type Apricorda, yoc 2000, 2000mm roller width, MachNo 460/0, with straighteneryp CME 50, FLC3 Controller
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Dry | Sanforizing
Special Offer   
Sanfor machine
Pos-Nr.: 92277     Pieces: 1

MONFORTS, 2000mm roller width, yoc 1986, steaming cylinder, WEKO humidity device, tenterinf device, felt calender, price CFR
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Dry | Sanforizing
Special Offer   
Shrinking Machine (Sanfor)
Pos-Nr.: 92317     Pieces: 1

MONFORTS, model: TOPTEX, yoc 2004, speed: 1 to 20 m/min. fabric width: 160 cm
installed power: 30 kW, electric supply: 63 A / 3 x 400 V / 50 Hz
control unit: relay control with a LENZE drive PLC
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Dry | Sanforizing
Special Offer   

show details
Sanfor Machine
Pos-Nr.: 92217     Pieces: 1

MONFORTS, FKSG-2/0, 1986, 1800mm ww, 5-50 n/min, Feeding E+L KF10, humidifier WEKO, steam cylinder, Rubber belt device (belt new in 2011), felt calender, cooling cylinder, J-box, batcher MAIER
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Dry | Sanforizing
Special Offer   
Sanfor Machine
Pos-Nr.: 92186     Pieces: 1

MONFORTS, TopTex, yoc 1997, 2000mm working width, Rubber band shrinking unit, 2 steam heated cylinders, grinder, working from roll to roll
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Dry | Stenters
Special Offer   



show details
Stenter Feeder (BABCOCK)
Pos-Nr.: 6929     Pieces: 1

ERHARDT & LEIMER, type LA 8301, with optic selvedge control FR 1501, selvedge spreader LS 1101, one-needle brushes, operating panel
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Dry | Stenters
Special Offer   

show details
Stenter Frame
Pos-Nr.: 92202     Pieces: 1

MUZZI/BABCOCK, yoc 2003, 2000mm, 8 chambers, horz.needle chain, gas heated, 2 roll padder, weft straightener PLEVA, cooling zone, batcher, plaiter, SIEMENS control, heat recovvering SCHEUCHE
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Dry | Stenters
Special Offer   
Stenter Frame
Pos-Nr.: 92283     Pieces: 1

BABCOCK, type 5358/ Econ-air system, 1998, 2400mm, 100 m/min, 7 chambers, vertical pin chain, thermoöl heated, 2 roll padder, entry field 3000mm, steamer, gluing device, 2 cooling fields, selvage cutters, weight control MAHLO GRAVIMAT, Thermal oil boiler EMK TO2000, 2093 kW
2014 the stente was reconditioned with new PLC and converter
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Dry | Stenters
Special Offer   




show details
Stenter
Pos-Nr.: 91650     Pieces: 1

KRANTZ, type K30, Y.O.M. 1999, machine No. 99502001-011 K100.00010, speed 3-30 m/min., 2 bays, 160cm working width, vertical pin chain, with foulard KÜSTERS type 225.99/1800, Y.O.M. 1983.
The machine is heated with hot water up to 100°C but it can be modified to be heated with thermic oil instead. The control was upgraded in 2006.
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Dry | Stenters
Special Offer   
Stenter Frame
Pos-Nr.: 92291     Pieces: 1

BABCOCK, BABCO-STAR 1028(5011), 3300mm, 6 chambers, gas heated, pin/clip chain, MAHLO weft straightener RFMC-10 Orthomat, padder KÜSTERS, type 51, selvage cutter, batcher, plaiter
Stenter is built in 19666, but complete reconditioned in 1999, new isolation, new chain and control, has been changed from oil to gas then, stenter was rarly used
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Dry | Stenters
Special Offer   
Stenter Frame
Pos-Nr.: 92247     Pieces: 1

STENTEX, type Stentotherm 3300, yoc 1996, 2200mm ww, horizontal clip chain, 10 chambers, gas heated, 2 padders KÜSTERS with 2 S-rollers each, MAHLO weft straightener, predryer with 2 chambers, coling zone, batcher
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Dry | Stenters
Special Offer   

show details
Multy Layer Stenter
Pos-Nr.: 92135     Pieces: 1

STENTEX, Stentotherm 3300 E-6, 2000mm ww, 3-60m/min, yoc 1999 (2010new controller SIEMENS Touch Multipanel), needle chain, 3 layer, 55m contence, 3 different temperatures, gas heated, 3-roller-padder BETA, MAHLO weft Straightener, exit with cooling cilynder
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Dry | Stenters
Special Offer   

show details
Stenter
Pos-Nr.: 92182     Pieces: 1

BRÜCKNER, 1997, 2000mm ww, 8 chambers, gas heated, MAHLO weft straightener Orthomat RFMC 10P, padder KÜSTERS type 222.52
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Dry | Tricot making-up
Special Offer   


show details
Vaccum Dehumificator with Annular Suction Nozzle
Pos-Nr.: 92035     Pieces: 1

SUCHY TEXTILMASCHINENBAU, Typ Suvac-Cut, yoc 2005, Tubular width 60- 120cm, 6-60m/min, the machine is for dewatering, hose opening and cutting, wet pleating of tubular knitted fabrics, there are spare nozzles for different sizes
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Dry | Winding machines
Special Offer   

show details
Cloth Scray
Pos-Nr.: 6967     Pieces: 1

IKS, yoc about 2008, 3500mm roller width, Contence 20m
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Dry | Winding machines
Special Offer   

show details
Ascending Batcher
Pos-Nr.: 6968     Pieces: 1

2600mm roller width
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Dry | Winding machines
Special Offer   
Big Batcher to install after loom
Pos-Nr.: 6987     Pieces: 2

KOHL, Model No 2350, yoc 2013, 3500mm wide, new and never used
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Dry | Winding machines
Special Offer   
Winding Machine
Pos-Nr.: 6967     Pieces: 1

O.M.R., type AD4R-90, no 34.0, yoc 1996, 4 winding heads for pirns and flange bobbins, changer
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Dry | Winding machines
Special Offer   



show details
Ascending Batcher
Pos-Nr.: 6962     Pieces: 1

CALATOR, 395 cm roller width, made in ca. 1991, moveable, loose and firm winding
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Miscellaneous | Coating
Special Offer   

show details
Coating Machine
Pos-Nr.: 92064     Pieces: 1

MENSCHNER, 2300mm rotter width, 2200mm ww, Doctor Blade on Rubber Belt, Revolver Head with three different knives, pneumatic quick lift, changing foam feeder
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Miscellaneous | Coating
Special Offer   




show details
Coating and Laminating Plant
Pos-Nr.: 6717     Pieces: 1

MACHTEX, type ES3 150, made in 1994, 160 cm working width.
The line consists of:
* Spraying unit with nozzles that are optionally either variable or fixed
* Unwinding for both fabrics
* Upwinding for the laminated product
* Calander with horizontal rollers and variably adjustable pressure
The machine is as good as new. It only run 20 hours. The nozzles are new and have not been in production yet!

The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Miscellaneous | Coating
Special Offer   

show details
Coating Machine
Pos-Nr.: 92136     Pieces: 1

ZAPPA, Blade over Roll coater, yoc 2005, roller width 2300mm, with revolver blades
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Miscellaneous | Compressors
Special Offer   
Compressor
Pos-Nr.: 6985     Pieces: 1

MATTEI, yoc 2000, 22kW, 30m³/min, 10,0 to 10,5 atm
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Miscellaneous | Laboratory
Special Offer   
Abrassion Tester (Martindale)
Pos-Nr.: 6978     Pieces: 1

JAMES HEAL, Martindale, 4 test places, Accessories
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Miscellaneous | Laboratory
Special Offer   


show details
Tensile Strength Tester For High-Performance Processes
Pos-Nr.: R004     Pieces: 1

USTER, Tensojet, UTS 4716.1005, yoc 1994.
For precise forecasting of yarn runability in high-performance processes with a test-speed of 400 m/min.
It measures tensile strength over 100.000 breaks at a rate of 30.000 breaks per hour
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Miscellaneous | Laboratory
Special Offer   

show details
Abrasion Tester (Martindale)
Pos-Nr.: 92156     Pieces: 1

ZWEIGLE, type T630/4, yoc 2009, 4 test places, with two cutters, one light cabinet and other accessories
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Miscellaneous | Laboratory
Special Offer   

show details
Laboratory Stenter
Pos-Nr.: 92057     Pieces: 1

RAPID, no 441, yoc 1995, max 400mm wide, different frame sizes
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Miscellaneous | Laboratory
Special Offer   

show details
Crockmeter
Pos-Nr.: 92158     Pieces: 1

LAB-PRO, type CFT, with counter
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Miscellaneous | Laboratory
Special Offer   
Strength Tester for ribbons
Pos-Nr.: 92296     Pieces: 1

GALDABINI, Quaser 5, INSTRON module 10kN, yoc 2011
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Miscellaneous | Mixer
Special Offer   

show details
Foam Mixer
Pos-Nr.: 92127     Pieces: 1

Mondomix, type UB 25
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Miscellaneous | Non-woven
Special Offer   
Nonwoven Line
Pos-Nr.: 92238     Pieces: 1

SAMHWA, Korea, yoc 2016, for PP, PET staple fiber (virgin/recycled)
final product weight: 250-1500g/m²
final product width: 1300-2000mm
product capacity about 2000t/year
details and photos upon request
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Miscellaneous | Ribbon production
Special Offer   
Ribbon Finishing Machine (Pad Steam)
Pos-Nr.: 92322     Pieces: 1

BENZ, typeKBBW-1, yoc 1975, 200mm roller width, padder, IR-heater, steamer upto 195°C, 4 wash compartements, 4-cylinder dryer
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Miscellaneous | Sewing machines
Special Offer   
Sewing Machine on Running Carriage
Pos-Nr.: 92260     Pieces: 1

GARIONI/EUROBOILERS, yoc 2011,type Assembly NG.C 4000, 4000 kg/hsteam, Nr 137 11,
1 atm, temperatuer 20 to 191,7°C, Gasburner
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Miscellaneous | Sewing machines
Special Offer   
Overlock Sewing Machines
Pos-Nr.: 6972     Pieces: 4

DOHLE, type Variant-S-8
- yoc 1999, no 990499
- yoc 2002, no 020H05
- yoc 2002, no 020H06
- yoc 2006, no 060H08
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Miscellaneous | Sewing machines
Special Offer   
Running Carriage Sewing Machine
Pos-Nr.: 6989     Pieces: 1

DOHLE, type 622A924, Chain Stich, yoc 1988, 200cm, No 88807
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Dry | Reeling Machines
Special Offer   

show details
Reeling Machine
Pos-Nr.: WP09     Pieces: 1

CROONE & LUCKE, type HB 201, no 10245, for 2 times 20 hanks
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Dry | Knife Shearing Machines
Special Offer   

show details
Shearing Machine
Pos-Nr.: 92121     Pieces: 1

VOLLENWEIDER, PSG-1, 3400mm roller wodth, yoc 2000, 1 Knife, for pile fabrics, CORINA straightener, iron detector, batcher, plater, suction device
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Miscellaneous | Boiler
Special Offer   
Steam Generator
Pos-Nr.: 6996     Pieces: 1

CERTUSS, Universal 1500, 1500kg/h, yoc 2003, 32atm, gas burner
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Miscellaneous | Boiler
Special Offer   
Steam Boiler
Pos-Nr.: 92220     Pieces: 1

LOOS, 3,2 to/h, 1991, 10 atm pressure, WEISSHAUPT gas burner
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Miscellaneous | Boiler
Special Offer   
Steam Boiler
Pos-Nr.: 92254     Pieces: 1

GARIONI/EUROBOILERS, yoc 2011,type Assembly NG.C 4000, 4000 kg/hsteam, Nr 137 11,
1 atm, temperatuer 20 to 191,7°C, Gasburner
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Miscellaneous | Finishing
Special Offer   

show details
Crashing Machine
Pos-Nr.: 92128     Pieces: 1

KRISTAL, type Faba Conticrash 350 E, yoc 2000, steam heated
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Miscellaneous | Packaging
Special Offer   




show details
Packaging Machine
Pos-Nr.: R2017     Pieces:

HAGEMANN, type VPADC700, no. 39.589.1, Y.O.M. 1990, for fabrics up to 2m width, the fabric rolls are welded lengthwise and at their ends
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Printing | Other
Special Offer   

show details
Beaker Washer
Pos-Nr.: 92145     Pieces: 1

RIOBEER 1996
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Finishing | Other
Special Offer   
Macking up Curtains
Pos-Nr.: 92234     Pieces: 1

IMPULSA, yoc 2013/2015
a. Frame for messuring and cutting, type Decotron, 450cm x 350cm
b. 2-Needle-Tape Sewing mc, type 6.2N45, for 50mm tape, Puller, autm. Locking
c. Speed Seamer, type 6.9010FAX, Lochstich, autm. Locking, autm. thread trimming, needle feed
d. Speed Seamer, Syncromatic 300 (2013), 5.NA300-9000, Puller, conveyer belt, 1-needle system
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Miscellaneous | Hemming Machines
Special Offer   
Crosshemming Machine
Pos-Nr.: 92267     Pieces: 1

SCHMALE/DURATE, type 630, yoc 2015, working width min.30cm/max.100cm, working length min.30cm/max 200cm, 2 double stepstitch sewing machines DÜRRKOPP/ADLER, 1st label giver type 056(right side) for folded and flag labels, 2nd label giver type 059(right side) for flag labels, 10.000 to 11.000 pieces/24h (3 shifts)
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Miscellaneous | Hemming Machines
Special Offer   
Cross Hemming Machine
Pos-Nr.: 92266     Pieces: 1

SCHMALE/DURATE, type 630, yoc 2014, working width min.30cm/max.78cm, working length min.30cm/max 160cm, 2 double stepstitch sewing machines DÜRRKOPP/ADLER, 1st label giver type 056(right side) for folded and flag labels, 2nd label giver type 059(right side) for flag labels, 10.000 to 11.000 pieces/24h (3 shifts)
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Spinning | Yarn Winding
Special Offer   


show details
Yarn Winding Machines
Pos-Nr.: 92183     Pieces: 3

SAHM 260 E, 250mm cone length, dia 93mm, with Konoid
1x yoc 1985 84 heads
1x yoc 1986 90 heads
1x yoc 2001 90 heads
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top

Categorie:  • Miscellaneous | Sample Machines
Special Offer   

show details
Two-For.One Twister (sample machine)
Pos-Nr.: 6998     Pieces: 1

OERLIKON ALLMA, type TechnoCorder TC-S, 2 spindels, 10", max bobbin dia 350mm, yoc 2008, gauge 600mm, upto 11000 rpm, speed 28 to 350m/min
The machine is either located at our warehouse
or sold exclusively by our company.
back Enquiry top